Identifying Radio Controls
English
7
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
• Short press – Pressing and releasing rapidly (0.05 seconds).
• Long press – Pressing and holding for the programmed
duration (between 1.00 second and 3.75 seconds).
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 25 for
more information on the programmed duration of the
Emergency button.
Assignable Radio Functions
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Manual Site Roam* – Starts the manual site search.
Monitor – Monitors a selected channel for activity.
Nuisance Channel Delete* – Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
One Touch Access – Directly initiates a predefined
Private or Group Call, a Call Alert or a Quick Text message.
Option Board Feature – Toggles option board feature(s) on or
off for option board-enabled channels.
Permanent Monitor *– Monitors a selected channel for all radio
traffic until function is disabled.
Privacy – Toggles privacy on or off.
Repeater/Talkaround* – Toggles between using a repeater and
communicating directly with another radio.
Scan* – Toggles scan on or off.
Site Lock On/Off* – Toggles the automatic site roam on or
off.
Telemetry Control – Controls the Output Pin on a local or
remote radio.
Transmit Interrupt Remote Dekey – Stops an ongoing
interruptible call to free the channel.
Voice Operating Transmission (VOX) – Toggles VOX on or
off.
Zone – Allows selection from a list of zones.
* Not applicable in Capacity Plus
NAG-LACR.book Page 7 Tuesday, March 9, 2010 1:53 PM
To Next Page
Loading...
