Advanced Features
English
22
6 Radio returns to the subscriber alias or ID screen.
OR
Procedure:
Using the menu.
1 S to access the menu.
2 Por Q to Contacts and press N to select.
3 Por Q to the required subscriber alias or ID and press
N to select.
OR
Por Q to Manual Dial and press N to select.
If there was previously dialed ID, the ID appears along with
a blinking cursor. Use the keypad to edit the ID. Press
N to
select.
OR
Por Q to Manual Dial and press N to select. Key in
the subscriber alias or ID and press N.
4 Por Q to Radio Check and press N to select.
5 The display shows Radio Check: <Subscriber Alias or
ID>, indicating that Radio Check is in progress. The LED
lights up solid green.
6 Wait for acknowledgement.
7 If the target radio is active in the system, a tone sounds and
the display briefly shows Target Radio Available.
OR
If the target radio is not active in the system, a tone sounds
and the display briefly shows Target Radio Not
Available.
8 Radio returns to the subscriber alias or ID screen.
If the R button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
NAG-LACR-EMEA.book Page 22 Monday, April 28, 2008 4:59 PM
To Next Page
Loading...
