44 Wireless
• Security—Select the type of security you want:
WEP, WPA, or WPA2. Enter a unique password.
Other users can access your Wi-Fi hotspot only if
they enter the correct password.
Note: Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot
Security
(
WPA2 is the most secure), including password.
• Broadcast Channel—Select a channel that
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
3 Touch Save when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot’s SSID,
selecting a Security type, and entering the correct
Password.
Bluetooth™ handsfree devices
Turn Bluetooth power on or off
Tu r n o n : Touch Menu > System settings, then drag
the Bluetooth power switch to the right to turn
it on.
Tu r n o f f : Touch Menu > System settings, then drag
the Bluetooth power switch to the left to turn
it off.
OFF
ON
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new Bluetooth devices
Note: This feature requires an optional accessory.
To connect with a new Bluetooth headset or other
device, you need to pair with it. You only need to do this
once for each device—to connect again, just turn on the
device.
1 Make sure the Bluetooth device you are pairing with
is in discoverable mode.
Note: Refer to the guide that came with the
Bluetooth device for details.
2 Touch Menu > System settings > Bluetooth.
3 Drag the Bluetooth power switch to the right to
turn on and scan. If Bluetooth power is already on,
touch SEARCH FOR DEVICES.
4 Touch a device to connect.
5 If necessary, touch OK, or enter the device passkey
(like 0000) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
OFF