41
English
PROGRAMMING
FEATURES
PROGRAMMING SCRAMBLE L
The scramble feature makes your
transmissions sound garbled to anyone
listening without the same scramble code. It
doesn't guarantee confidentiality, but it adds an
extra layer of privacy. Scramble default value is
OFF.
Once you have entered ’Programming Mode’
and selected the channel in which you want to
enable scramble (L), scroll up/down through
the programming options by short pressing the
PTT button, until your radio reaches the
‘Scramble Programming Mode’:
The current scramble setting will blink. You can
select the desired scramble value (0,1,2 or 3)
by pressing the
/ buttons. Long
press the PTT button to exit and save or short
press the PTT button to move to the next
programming feature without saving.
Note: The values available for scrambling are
dependent upon the values programmed via
the CPS. When the scramble setting is "0" it
means it is disabled.
PROGRAMMING MAXIMUM NUMBER OF
CHANNELS
You can configure the maximum number of
channels for the radio.
Once you have entered ’Programming Mode’
scroll up/down by short pressing the PTT
To Next Page
Loading...
Need help?
General
