Motorola XTS-5000 - Page 33

Secure / Clear TransmitSecure / Clear Transmit
(2(2--Position Concentric Switch)Position Concentric Switch)
The radio will receive encr
yp
ted calls without
yp
enabling the Secure switch, but to transmit in
secure, the Secure switch must be enabled.
To select secure transmissions:
POL
DISP NW
PAGE CALL
MUTE
Secure/Clear
Turn the Secure/Clear switch to the predetermined
secure position ( ).
Note: If the selected channel is programmed for clear-
only operation, you will be unable to transmit in secure. If
th
PTT
b tt ill CLR TX ONLY
y
ou press
th
e
PTT
b
u
tt
on, you w
ill
see
CLR
TX
ONLY
displayed, and you will hear an invalid mode tone.
The radio will not transmit until you set the Secure/Clear
switch to the clear position ( ).
Secure
Clea
r
3434