5 Operation
Rev. 12/2019 27
5.5 Evaluation of Measurement Results
If the voltage is too low or too high, this implies a faulty ignition system or a faulty spark plug.
The voltage range which is correct for your ignition system can be found in the documentation
for your ignition system. It is advisable to carry out a reference measurement immediately after
installing the ignition system, in order to be able to compare subsequent measurements.
5.6 Shutdown
If you do not need the device for a longer period of time, remove the inserted batteries. To do so,
follow the instructions in the section Changing the Battery on page 30, but do not insert new
batteries.
To Next Page
Loading...