Need help?Do you have a question about the MOTU MicroBook IIc and is the answer not in the manual?
General| Number of Inputs | 4 |
|---|---|
| Sample Rate | 96 kHz |
| Bit Depth | 24-bit |
| Phantom Power | Yes |
| Connectivity | USB |
| A/D Resolution | 24-bit |
| Bus Powered | Yes |
| Microphone Preamps | 2 |
| Audio Interface Type | USB |
| Headphone Output | 1 (1/4" TRS) |
| MIDI I/O | Yes |
| Analog Inputs | 2 |
| Analog Outputs | 2 |
| USB | USB 2.0 |
Key safety instructions for operating the MicroBook, covering handling, power, and maintenance.
Explains how to connect microphones, guitars, and line-level devices to the MicroBook's inputs and outputs.
Explains how to access and adjust input channel settings like phantom power, pad, and trim using CueMix FX.
Illustrates a common studio setup configuration with the MicroBook, computer, and peripherals.
Guides users to install the necessary OS X audio drivers for full MicroBook functionality.
Discusses buffer size settings, their impact on latency, and how to adjust them.
Details two methods for monitoring live audio input through the computer or CueMix FX.
Guidance on adjusting buffer sizes to minimize monitoring delay and optimize computer performance.
Explains the benefits of direct hardware monitoring using CueMix FX.
Steps for installing the necessary Windows audio drivers for the MicroBook.
How CueMix FX integrates with host mixing for monitor control and effects.
Details the MicroBook's 8-bus digital mixer for routing, mixing, EQ, and dynamics processing.
Highlights the advantages of CueMix FX over host-based mixing and effects processing.
Provides contact methods for technical support, including phone and online resources.
To Next Page
