EasyManua.ls Logo

Mountain Buggy Protect Capsule Base - Harness Positioning

Mountain Buggy Protect Capsule Base
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions
HARNESS POSITIONING
1a Position the height of harness according to the child’s
height. The harness straps should be level with the
child’s shoulders. Do not use the child restraint
with the harness if the child’s shoulder are above
the heightest slots in the backrest or if the child’s
weight exceeds 13kg.
1b Put the two buckle clips together, then lock into
the female buckle. (1b)
Tighten the straps until they are in contact with your
child's body.
CAUTION!
The hip belt must lie as low as possible over your
child's hips.
1a
1b