Instructions
INSTALLATION IN THE VEHICLE WITHOUT BASE
6a Place the child restraint rear-facing on the vehicle seat and
make sure the handle is in specified position. The child will
face the rear of the vehicle.
6b Route the vehicle lap belt through both lap belt guides and
buckle the seat belt.
6c Route the vehicle shoulder belt around the back of the
child restraint and through the shoulder belt guide.
6d If vehicle shoulder belt is too short, please move vehicle
seat belt height adjustment to the lowest possible height.
If the vehicle belt is still too short, try another seating position.
6a
6b
6c
6d
To Next Page
Loading...