EasyManua.ls Logo

Mountain Buggy Protect Capsule Base - Final Harness Tightness Check

Mountain Buggy Protect Capsule Base
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions
5d Align the top and bottom buckle clips to form
one clip.
5e Insert into the buckle until you hear a “click”. Make sure the
shoulder straps are not twisted. Adjust the shoulder pads
over the centre of the child’s shoulders.
5f Pull the harness adjustment strap until shoulder straps are
tight against the child.
5g For proper tightness, one finger should fit between the
harness straps and the child’s shoulders.
To remove the child, loosen shoulder straps and release
buckle.
Discontinue use when child’s weight > 13kg, height > 74cm
or head is less than 2cm above the top of the shell.
5d
5e
5f
5g