Need help?Do you have a question about the Mountain Top EVOe and is the answer not in the manual?
Operate the EVOe roll cover by pressing the remote button for one second to open or close.
Press the remote button for one second to stop and resume operation, reversing direction.
The cover enters Sleep Mode after 48 hours inactivity. Press remote for 1 second to wake.
Hold remote button 3 seconds to toggle lights on/off. Lights stay on for 8 minutes.
Calibrate/reset the roll cover by holding the remote button for 12 seconds.
Disengage motor and belt drive by pulling the release handle on the right rear profile.
Firmly press rear profile into belt drive handles until two 'CLICKS' are heard.
Obstructions stop cover movement and retract it 10cm. Lights flash rapidly.
Motor stops on overload with slow flashing lights. Resumes after a 2-minute pause.
High temperatures cause overload stop. Lights flash slowly, resuming after 3 minutes.
General| Brand | Mountain Top |
|---|---|
| Model | EVOe |
| Category | Automobile Accessories |
| Language | English |
To Next Page
