Need help?Do you have a question about the Mountain Top Wildtrak and is the answer not in the manual?
General| Brand | Mountain Top |
|---|---|
| Model | Wildtrak |
| Category | Automobile Accessories |
| Language | English |
Addresses dry or dirty flocking lists impeding roll cover operation. Recommends cleaning and lubrication.
Guides on realigning side rails and checking for 1-1.5mm free movement of the rear profile.
Instructions to re-tighten side rail brackets in the correct order to prevent bending and ensure proper operation.
Details adjusting the main spring tension via the pinion to control the roll cover's opening speed and force.
Steps to correct side rail alignment for proper locking mechanism closure and 1-1.5mm rear profile movement.
Procedure to fix misaligned locking pins by re-aligning side rails and checking 90° angles.
Instructions to re-tighten loose side rail bolts, ensuring proper function of the locking mechanisms.
Guidance on identifying older rear profile versions using the serial number and referencing technical bulletins.
Troubleshooting for key unlocking failures, including checking serial numbers and thawing frozen locks.
Addresses operation issues caused by ice or snow, recommending removal with a hairdryer.
Resolving a jammed lock button by adjusting main spring tension or tailgate alignment.
Instructions for dealing with a jammed lock striker by pushing it back into the rear profile.
Activating lock strikers and pull-strap for correct locking in all three positions.
Final recommendation to replace the rear profile if locking system problems persist after all other fixes.
Sealing plastic bed liner plugs to prevent water and dirt ingress at specified locations.
Applying silicone seals to Wildtrak bar components and seals to prevent water/dirt ingress.
To Next Page
