02/30
(Fig. 1) Open the roll cover completely. (Fig. 2) Clean the fl ocking lists using either a brush or
soft cloth.
(Fig. 3) Lubricate the fl ocking lists with silicone oil. (Fig. 4) Close and then open the roll cover a few times
to check if the problem has been corrected.
The fl ocking lists are dry / dirty
1.A
If not cleaned regularly, the fl ocking lists can become dry or dirty, preventing the roll cover from
operating correctly. To correct the problem, clean with a brush or cloth and lubricate the fl ocking
list using silicone oil (fi g. 1 - 4).
To Next Page
Loading...
