Mountfield 1435E User Manual

21
EN
HOW TO USE THE MACHINE
Gradually reach the desired speed using the throttle and gear lever. To change gear,
press the clutch halfway down (
☛ 4.21).
When moving the machine from one area to
another, position the throttle between «SLOW» and «FAST».
Disengage the parking brake and release the brake pedal (
☛ 4.31).
Press the drive pedal (
☛ 4.32) in direction «F» and reach the required speed by
gradually increasing pressure on the pedal and working the throttle.
Drive must be engaged as described ( ☛ 4.32) ) to prevent
sudden engagement from causing tipping up and loss of control of the vehicle,
particularly on slopes.
5.4.3 Braking
First reduce the machine’s speed by reducing the engine’s r.p.m., and then press the
brake pedal (
☛ 4.21 or 4.31) to slow down the machine until it stops.
The machine already slows down considerably
by just releasing the drive pedal.
5.4.4 Reverse
Reverse must be engaged only when the machine has stopped
moving.
Press the pedal until the machine stops and
then go into reverse by shifting the lever sideways and into position «R» (
☛ 4.22).
Gradually release the pedal to engage the clutch and then begin moving in reverse.
When the machine has stopped moving, start
reversing by pressing the drive pedal in direction «R» (
☛ 4.32).

➤
Hydrostatic transmission:

➤
Mechanical transmission:
IMPORTANT

➤
Hydrostatic transmission:

!
WARNING!

➤
Hydrostatic transmission:

Mountfield 1435E Specifications

General

Brand	Mountfield
Model	1435E
Category	Lawn Mower
Language	English