31
EN
MAINTENANCE
6.2.3 Rear axle
This is a sealed single unit that does not require maintenance. It is permanently lubri-
cated and its lubricant does not need changing or topping up.
6.2.4 Battery
The battery must be carefully main-
tained to ensure long life. The
machine battery must always be
charged:
– before using the machine for the
first time after purchase;
– before leaving the machine dis-
used for a long period;
– before starting up the machine
after a long period of disuse.
Carefully read and observe the bat-
tery recharging instructions in the
booklet provided with the battery.
Failure in following the instructions or
in charging the battery could perma-
nently damage the battery cells.
A flat battery
must be recharged as
soon as possible.
Recharging
must be done using a battery
charger at
constant voltage. Other
recharging systems can irreversibly
damage the battery
The machine comes with a connector (1) for recharging; this is connected to the corre-
sponding connector for the special “CB01” maintenance battery-charger supplied
( if included) or available on request (☛ 8.5).
This connector must only be used for connection to the “CB01”
maintenance battery-charger. For its use:
– follow the instructions in the relevant user manual,
– follow the instructions in the battery manual.
IMPORTANT
➤
IMPORTANT
To Next Page
Loading...
