To Next PageTo Next PageWhy Mountfield MC 300 Li Lawn Mower engine does not start?
If your Mountfield Lawn Mower's engine doesn't start when using the switch, it might be due to several reasons. First, ensure the safety key is properly inserted. Next, check that the safety key is in the "1" or "2" position, depending on your model. Also, verify the battery is correctly fitted in its slot. Lastly, check the battery status and recharge it if necessary.
What to do if Mountfield MC 300 Li motor shuts down while working?
If your Mountfield Lawn Mower motor shuts down while working, it could be due to a few reasons. First, make sure the battery is correctly inserted. Also, check the battery status and recharge if needed. Another possibility is obstructions preventing the cutting means rotation. In this case, remove the safety key, wear work gloves, and clear any grass or debris from the machine's lower part and/or the discharge chute.
Why is the battery power reserve low on my Mountfield Lawn Mower?
If you're experiencing low battery power reserve with your Mountfield Lawn Mower, it could be due to severe working conditions that demand more current. Try optimising the operation. Alternatively, the battery might not be sufficient for your operating needs, consider using a second battery or an extended battery.
Why is my Mountfield MC 300 Li not collecting grass?
If the cut grass is no longer being collected in the grass catcher of your Mountfield Lawn Mower, it could be because the cutting means hit a foreign object. In this case, turn off the motor and remove the safety key. Check for any damage and contact a Service centre to replace the cutting means if necessary. Alternatively, the inner part of the chassis might be soiled. Clean the inner part of the chassis to help the grass move towards the grass catcher.
Why is my Mountfield MC 300 Li Lawn Mower making excessive noise?
If you are experiencing excessive noise or vibration while using your Mountfield Lawn Mower, immediately turn off the motor and remove the safety key. The issue could be loose cutting means fittings or a damaged cutting means. Contact the Authorised Service Centre for checks, replacements or repairs.
Why is mowing difficult with my Mountfield MC 300 Li?
If mowing is difficult with your Mountfield Lawn Mower, the cutting means may not be in good condition. Contact the Authorised Service Centre to sharpen or replace the cutting means.
What to do if Mountfield MC 300 Li Lawn Mower engine is running but the cutting means does not rotate?
If the engine of your Mountfield Lawn Mower is running but the cutting means does not rotate, immediately turn off the motor and remove the safety key. The cutting means fittings may be loose. Contact an authorised service centre to ensure correct fastening.
General| Power Source | Battery |
|---|---|
| Cutting Width | 30 cm |
| Cutting Height Adjustment | Central |
| Collection Capacity | 30 L |
| Battery Capacity | 2.5 Ah |
