2
WHICH PHONES ARE COMPATIBLE WITH
MY SMARTWATCH?
Your smartwatch is compatible with Android™ and
iOS phones, specifically with Android 4.4+ (excluding
Go edition) or iOS 12. All devices are Bluetooth
®
Smart-enabled with an improved data transfer of 4.1
Low Energy.
HOW DO I DOWNLOAD THE WEAR OS BY
GOOGLE™ APP?
iOS: Go to the App Store
®
and select Search from
the bottom menu. Type “Wear OS by Google” in the
search bar, select the Wear OS by Google app, and
tap Get. Wait for the app to download to your phone.
ANDROID: Go to the Google Play store, type Wear
OS by Google in the search bar, select the Wear OS
by Google app, and tap Install. Wait for the app to
download to your phone.
HOW DO I SET UP MY SMARTWATCH?
Follow these steps:
•
On your phone, download and install the Wear
OS by Google™ app from the App Store
®
or
Google Play Store.
•
Plug included charger into a USB wall charger.
Place watch on charger by aligning the 4
magnetic pins on the back of the watch to the pins
on the charger. WARNING: To avoid damage to
your watch, only use with included charger.
•
To turn on your watch, press and hold the crown
(on the right-hand side of the watch) for a few
seconds. It will take up to a few minutes for your
watch to start up. Once turned on, tap the screen
to begin and select a language.
•
Open the Wear OS by Google app on your
phone. If you don’t have Bluetooth turned on for
your phone, the app will instruct you to turn it on.
•
Then follow the instructions on your phone to pair
with your watch. Tap on the code that matches
the one on the watch and confirm pairing.
•
A confirmation message on your watch will be
displayed once it is paired. This can take a few
minutes, please be patient.
•
Follow the onscreen instructions on the Wear OS
by Google app on your phone to complete the
initial setup.
HOW DO I POWER ON MY SMARTWATCH?
Make sure the smartwatch is charged before trying
to power it on. Press and hold down the crown for at
least three seconds. The smartwatch will also power on
when connected to the charger.
HOW DO I POWER OFF MY SMARTWATCH?
If display is off (watch is asleep but still powered on),
press the crown to power up the display. When you
confirm the display is on follow these steps:
•
Press the crown to enter the app menu.
•
Scroll and tap on Settings.
•
Tap on System.
•
Swipe up and tap Power off.
•
Tap the checkmark to confirm.
HOW DO I RESTART MY SMARTWATCH?
If display is off (watch is asleep but still powered
on), press the crown to power up display. When you
confirm the display is on follow these steps:
•
Press the crown to enter the app menu.
•
Scroll and tap on Settings.
•
Tap on System.
•
Swipe up and tap Restart.
GENERAL SET UP & APP
To Next Page
Loading...
