Fig.10A Fig.10B
Fig.10C Fig.10D
Start the engine carefully according to instructions and with feet well away from the blade.
Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high
grass or obstacles.
Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the
discharge opening.
7.2.2 STARTING ELECTRICALLY
FOR DYM1678D-3/DYM162002/DYM1560EDQ:
1. The unit is equipped with a rubber boot over the end of the spark plug, make certain the metal loop on the
end of the spark plug wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug.
2. Before starting engine, please turn the fuel switch to the “ ”position. ( Fig.10A )（Only for
DYM1678D-3
）
3. When starting cool engine, turn throttle choke lever to “ ” position.
When starting warm engine and operating, turn throttle chock lever to “ ”position. (Fig.10B)
(For DYM1678D-3/DYM162002)
4. Standing behind the unit, grasp the brake control handle and hold it against the upper handle as shown in
Fig.11A/11B.
5. Press the starter button. (Fig.11C )
6. As soon as the motor starts running, release the starter button.
Release the brake control handle to stop the engine and blade.
7. When you finish the job of mowing each time, please turn the fuel lock to the” ”. (Fig.10D).
（Only for
DYM1678D-3
）
Fig.11A Fig.11B(only for DYM1560EDQ) Fig.11C
FOR DYM1676CD-3:
1. The unit is equipped with a rubber boot over the end of the spark plug, make certain the metal loop on the
To Next Page
Loading...
Need help?
General
