Mowox RM 1200 Li BT User Manual (English)

Other manuals for Mowox RM 1200 Li BT

Questions and Answers:

C
Christopher KaufmanAug 20, 2025
What to do if my Mowox Lawn Mower stopped in the working area?
- P
  Patrick CarsonAug 21, 2025
  If your Mowox Lawn Mower stops in the working area, several factors could be the cause. It might be trapped by an obstacle or jammed between trees or bushes. Remove any obstacles or adjust the boundary wire layout to avoid the area. Also, check if the grass is too tall, blocking the mower's movement; if so, cut the grass to less than 60 mm. Restart the mower or return it to the charging station. If the issue persists, ensure the boundary wire is correctly laid, especially in narrow corners or around fences.
B
Brandon KnightAug 22, 2025
What should I do if my Mowox RM 1200 Li BT Lawn Mower turns in circles and then stops?
- S
  Sonya Sanchez MDAug 22, 2025
  If your Mowox Lawn Mower is turning in circles before stopping, it might be due to a boundary signal error. Ensure the mower is within the designated working area and that the LED indicator on the charging station shows a constant green light. If the mower repeatedly runs outside the boundary in a specific spot, check for nearby high-voltage cables and adjust the boundary wire's position. Similarly, if it occurs on a slope, alter the boundary wire to avoid that area. You can also try restarting the mower or taking it back to the charging station.
S
Shane SilvaAug 25, 2025
What to do if my Mowox Lawn Mower stopped in tall and rough grass?
- E
  Erik GonzalezAug 25, 2025
  If your Mowox Lawn Mower stops in tall and rough grass, this could be due to motor over-current or motor fault. First, ensure the grass is cut to less than 60 mm using a conventional mower. You can also increase the cutting height of the robotic mower. Check if the blade disk or wheels are jammed and clean them if necessary. Restart the robotic mower or take it back to the charging station.
A
Ashley ThompsonAug 26, 2025
What to do if my Mowox RM 1200 Li BT Lawn Mower goes back to the station and stays there during scheduled working time?
- D
  dmorrisonAug 26, 2025
  If your Mowox Lawn Mower returns to the station and remains there during its scheduled working time, it could be due to the PCB overheating. During the summer, schedule the working time for the early morning to avoid the hot daytime temperatures. Once the PCB cools down, the robotic mower will automatically resume its programmed schedule.
T
teresasanchezAug 27, 2025
Why my Mowox RM 1200 Li BT doesn't move?
- J
  jenniferrichardsonAug 27, 2025
  If your Mowox Lawn Mower isn't moving, it might be due to a mainboard error. Try rebooting the robot. If the error continues, it indicates a serious damage to the mother board.
M
Mr. Andrew SimmonsAug 29, 2025
What to do if my Mowox RM 1200 Li BT tumbled and stopped?
- F
  fbrownAug 29, 2025
  If your Mowox Lawn Mower tumbled and stopped, it may be due to rolling over or tilting. If this is caused by steep slopes, adjust the boundary wire layout to avoid those areas. You can also take the mower to a flat surface and restart it.
E
elliottpamelaAug 31, 2025
What to do if my Mowox Lawn Mower stopped while running back to the station?
- S
  Steven MitchellAug 31, 2025
  If your Mowox Lawn Mower stopped while running back to the station, remove any obstacle on the boundary.
K
Kathy CarterSep 2, 2025
Why is my Mowox Lawn Mower very noisy?
- N
  Norman HarrisonSep 2, 2025
  If your Mowox Lawn Mower is making excessive noise, replace all three blades simultaneously, as the mower's cutting efficiency depends on sharp blades. Stop the robotic mower and use gloves to remove any debris from the blades to avoid injuries. If the problem persists, the motor may need repair or replacement by a service station.
L
Lisa BrownSep 3, 2025
What to do if my Mowox RM 1200 Li BT screen is off?
- J
  Jessica LongSep 4, 2025
  If the screen on your Mowox Lawn Mower is off, try pressing the power key on the keyboard for 3 seconds to turn the LCD screen on. Also, ensure the main power switch is set to “ON”. If you are using the mower for the first time, the battery may not be fully charged, so place it in the charging station. You can also try hitting the power key on the control panel, then input your PIN to start the mower. If the screen remains off, place the mower in the charging station, ensuring the main switch is “ON” to allow charging.
M
markbaileySep 5, 2025
What to do if my Mowox RM 1200 Li BT Lawn Mower robotic mower stopped in the working area because it was lifted?
- J
  jeremy49Sep 5, 2025
  If your Mowox Lawn Mower stops because it was lifted, check for obstacles lower than 100 mm in the working area. If there are any, remove them or change the boundary wire layout to exclude those areas.

Mowox RM 1200 Li BT Specifications

General

Type	Robotic Lawn Mower
Battery	Lithium-Ion
Cutting Width	18 cm
Cutting Height	20-60 mm
Max Area	1200 m²
Bluetooth	Yes
Runtime	60 min
Cutting Height Adjustment	Central adjustment
Grass Catcher Volume	Not applicable
Blade Type	3 blades

Summary

Robotic Mower Overview

Safety Instructions

Safe Operating Practice

Guidelines for safe operation, training, preparation, and general use.

Transportation

Instructions on how to safely move the robotic mower from or within the working area.

Maintenance and Special Instructions

General maintenance advice, including safety precautions, blade care, and using original parts.

Battery Safety

Safety precautions and first aid for battery handling and potential leakage.

Charger Safety

Safety instructions for the charger, including placement, cleaning, and troubleshooting.

Robotic Mower Safety Features

Details the various safety features of the robotic mower.

Anti-theft and Disabling Device

Explains the anti-theft system requiring a PIN code for operation.

Lift and Tilt Sensors

Describes how lift and tilt sensors stop the blade rotation for safety.

Obstruction Sensor

Explains how the mower detects and reacts to obstacles.

Emergency Stop and Safety Switch

How to use the STOP button and safety switch for immediate shutdown.

Base Station and Perimeter Wire

Dependency on the perimeter wire for operation and its connection.

Safety Symbols on Mower

Explains various warning and caution symbols found on the mower.

Safety Symbols on Charger

Explains symbols related to the charger and its safety features.

Safety Symbols on Battery Pack

Explains symbols specific to the battery pack.

Lightning Protection

Advises on protecting the robot from lightning strikes and related actions.

Technical Data

Product Specifications

Presents detailed technical specifications for different models, including power, dimensions, and noise levels.

Packaging Contents

Included Items List

Lists all items included in the product packaging with corresponding numbers.

Basic Operating Principles

Random Operation with Boundary Wire

Explains how the mower operates within the boundary wire loop and its random movement pattern.

Obstacle Recognition and Islands

Details how the mower detects obstacles and handles boundary wire islands.

Navigation in Corridors

Specifies the requirements for the mower to navigate narrow lawn corridors.

Helix Cutting Mode

Describes the helix cutting mode for improving mowing in large lawns.

Cutting Height Adjustment

Explains how to adjust the cutting height and pre-use preparation.

Installation Guide

Installation Introduction

Introduces the installation process, emphasizing planning and tool preparation.

Perimeter Islands Setup

Guides on using boundary wire to create islands around obstacles.

Boundary Wire Installation

Discusses installation methods for the boundary wire on soil and in soil.

Boundary Wire Distance from Edge

Explains the required distance of the boundary wire from the garden edge.

Handling Obstacles Over 100mm

How the mower recognizes and reacts to obstacles taller than 100mm.

Protecting Trees and Stones

How to protect trees and stones using boundary wire.

Slope Management

Explains the slope limits and how to calculate them.

Boundary Wire Placement on Slopes

Guides on placing boundary wire on slopes, considering distances and steepness.

Paths and Pavements Handling

How to handle paths, driveways, and pavements during boundary wire installation.

Charging Station Setup

Locating the Charging Station

Instructions on choosing the best position for the charging station.

Boundary Wire Connection to Station

Steps to prepare and connect the boundary wire to the charging station terminals.

Charger Connection to Station

Instructions for connecting the charger to the power supply and charging station.

Charging Station LED Indicators

Explains the meaning of different LED indicator states on the charging station.

Turn On and Test Installation

Initial Power On and Testing

Guides on powering on the robot and verifying the installation.

Stopping the Mower

How to stop the robotic mower at any time using the STOP button.

Secure the Charging Base

Fixing the Charging Base

Instructions on how to fix the charging base securely using fixing nails.

Charging Information

Mower Return to Charging Station

Explains when the mower returns to the charging station.

Programming the Mower

Setting Date and Time Importance

Emphasizes the importance of setting the correct date and time for programming.

Control Panel Overview

Introduces the control panel and how to unlock the robot with the factory PIN.

Control Panel Key Functions

Explains the functions of various keys on the control panel.

Main Operation Menu

Provides an overview of the main operation menu and its categories.

Battery Status Indicators

Shows battery status indicators for full charge and 30% remaining.

Settings Menu Introduction

Introduces the settings menu, starting with date and time.

Setting Date and Time

Step-by-step guide to setting the date and time on the robotic mower.

Configuring Rain Mowing

Instructions on configuring the mower's behavior when it rains.

Rain Sensor Functionality

Explains the function of the rain sensor and its behavior in rain.

Changing the Mower's Language

Guides on how to change the language setting on the mower.

Setting Up Secondary Mowing Areas

Explains how to set up and manage secondary mowing areas.

Setting Cutting Schedule

How to set the mowing schedule for weekdays and specific times.

Boundary Cut Option

Option to enable mowing along the boundary wire.

Cutting and Heading Home

Starting Mowing and Returning to Base

How to start the mower and how it heads back to the charging station.

Charging Process

Monitoring Charging Progress

Describes the charging progress indicated by the LED on the base station.

Change PIN Code

Procedure for Changing PIN

Steps to change the default PIN code for security and access.

PIN Forgotten

Procedure for Forgotten PIN

Instructions on what to do if the PIN code is forgotten.

Firmware Update

Firmware Update Methods

Outlines methods for updating the robot's firmware via Bluetooth or USB.

Updating Firmware via USB

Detailed steps for updating firmware using a USB memory stick.

Maintenance

General Cleaning Advice

General instructions for cleaning the mower, advising against flushing water.

Battery Life and Care

Information on the battery's lifespan and care recommendations.

Winter Storage Guidelines

Guidelines for preparing and storing the mower during winter.

Cleaning and Maintenance Details

Specific instructions for cleaning the mower body, underside, and charging contacts.

Blade Inspection and Replacement

Safety warnings and instructions for inspecting and replacing blades.

Battery Replacement Procedure

Step-by-step guide for replacing the battery pack in the robotic mower.

Troubleshooting

Charging Station Troubleshooting

Table of LED indicators and their corresponding solutions for charging station issues.

Robotic Mower Initial Troubleshooting

Initial troubleshooting steps for common robotic mower problems like not starting.

Mower Trapped and Lifted Issues

Solutions for when the mower gets trapped, lifted, or tilted.

Rollover and Motor Overload Issues

Troubleshooting for mower rollover, tilted position, or motor overload.

Boundary Signal and Battery Temperature Issues

How to fix boundary signal errors and battery temperature problems.

Charging and Hall Sensor Errors

Steps to resolve charging issues and Hall sensor problems.

Screen Off and Station Entry Errors

Solutions for when the screen is off or the mower cannot enter the station.

Island Behavior and Noise Issues

How to fix abnormal behavior around islands and excessive noise.

Rain Operation and Sensor Cleaning

How to clean the rain sensor if the robot operates in the rain.

Warranty Conditions

Power Tool Warranty Details

Details the 24-month warranty coverage and exclusions for power tools.

Battery Warranty and Care

Explains the 12-month warranty for the battery pack and its care.

Environmentally Friendly Disposal

Disposal of Mower, Charger, and Battery

Guidance on the proper disposal of the lawn mower, charger, and battery.

Battery Disposal Regulations

Specific instructions for battery disposal according to legislation.

EC Declaration of Conformity

Product Compliance Declaration

Official declaration of the product's compliance with relevant EC directives.

Related product manuals

Mowox RM 1200 Li BT User Manual

Table of Contents

Other manuals for Mowox RM 1200 Li BT

Questions and Answers:

Mowox RM 1200 Li BT Specifications

Summary

Robotic Mower Overview

Safety Instructions

Safe Operating Practice

Transportation

Maintenance and Special Instructions

Battery Safety

Charger Safety

Robotic Mower Safety Features

Anti-theft and Disabling Device

Lift and Tilt Sensors

Obstruction Sensor

Emergency Stop and Safety Switch

Base Station and Perimeter Wire

Safety Symbols on Mower

Safety Symbols on Charger

Safety Symbols on Battery Pack

Lightning Protection

Technical Data

Product Specifications

Packaging Contents

Included Items List

Basic Operating Principles

Random Operation with Boundary Wire

Obstacle Recognition and Islands

Navigation in Corridors

Helix Cutting Mode

Cutting Height Adjustment

Installation Guide

Installation Introduction

Perimeter Islands Setup

Boundary Wire Installation

Boundary Wire Distance from Edge

Handling Obstacles Over 100mm

Protecting Trees and Stones

Slope Management

Boundary Wire Placement on Slopes

Paths and Pavements Handling

Charging Station Setup

Locating the Charging Station

Boundary Wire Connection to Station

Charger Connection to Station

Charging Station LED Indicators

Turn On and Test Installation

Initial Power On and Testing

Stopping the Mower

Secure the Charging Base

Fixing the Charging Base

Charging Information

Mower Return to Charging Station

Programming the Mower

Setting Date and Time Importance

Control Panel Overview

Control Panel Key Functions

Main Operation Menu

Battery Status Indicators

Settings Menu Introduction

Setting Date and Time

Configuring Rain Mowing

Rain Sensor Functionality

Changing the Mower's Language

Setting Up Secondary Mowing Areas

Setting Cutting Schedule

Boundary Cut Option

Cutting and Heading Home

Starting Mowing and Returning to Base

Charging Process

Monitoring Charging Progress

Change PIN Code

Procedure for Changing PIN

PIN Forgotten

Procedure for Forgotten PIN

Firmware Update

Firmware Update Methods

Updating Firmware via USB