EasyManuals Logo

Moxa Technologies ioThinx 4510 Series Quick Installation Guide

Moxa Technologies ioThinx 4510 Series
12 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
- 12 -
WARNING
EXPLOSION HAZARD
Do not disconnect the equipment unless the power has been
removed or the area is known to be nonhazardous.
Substitution of any components may impair suitability for Class
I, Division 2.
WARNING
The Debug port and
Console port are FOR MAINTENANCE
ONLY; NOT FOR USE IN HAZARDOUS LOCATIONS
Conditions for Safe Use
1. This device is only for indoor use in environments with pollution
degree 2, as defined in EN IEC 60664-1.
2. The equipment shall be installed in an enclosure that provides a
minimum ingress protection of IP54, in accordance with EN IEC
60079-0.
3. If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired. The manufacturer is not responsible for accidents
caused by improper use of the equipment.

Other manuals for Moxa Technologies ioThinx 4510 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies ioThinx 4510 Series and is the answer not in the manual?

Moxa Technologies ioThinx 4510 Series Specifications

General IconGeneral
BrandMoxa Technologies
ModelioThinx 4510 Series
CategoryController
LanguageEnglish