Need help?Do you have a question about the Moxa Technologies NPort IA 5250 series and is the answer not in the manual?
General| Device Type | Serial Device Server |
|---|---|
| Model | NPort IA 5250 series |
| Category | Network Hardware |
| Number of Serial Ports | 2 |
| Serial Interface | RS-232/422/485 |
| Baud Rate | 50 bps to 921.6 kbps |
| Data Bits | 5, 6, 7, 8 |
| Parity | None, Even, Odd, Space, Mark |
| Stop Bits | 1, 1.5, 2 |
| Power Input | 12 to 48 VDC |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Humidity | 5 to 95% (non-condensing) |
| Flow Control | Xon/Xoff |
| Weight | 300 g |
| Certifications | CE, FCC, UL |
| Protocols | TCP, UDP, HTTP, SNMP, Telnet |
| Mounting | DIN-Rail |
Provides essential safety and routing guidelines for connecting power and device wiring to the NPort IA5150/5250 series.
Explains how to connect the 12-48 VDC power line to the NPort IA5150/5250 terminal block and indicates the status via the Ready LED.
Describes how to connect the NPort IA5150/5250 to an Ethernet network using an Ethernet cable and how to interpret the Ethernet LED status.
Explains how to connect the NPort IA5150/5250 to a serial device using a serial data cable.
Outlines the steps to determine and configure the IP address for NPort IA5150/5250, either static or dynamic.
Describes how to use Telnet to access and configure the NPort IA5150/5250’s IP address from a network connection.
Details how to use an RS-232 console port with a terminal emulator to configure the NPort IA5150/5250’s IP address.
Describes the Real COM Mode, which uses drivers to map NPort IA5150/5250’s serial port to a local COM/TTY port on the host computer.
Explains TCP Server Mode where the NPort IA5150/5250 waits for host connections to establish data transfer.
Details TCP Client Mode, where the NPort IA5150/5250 actively establishes a TCP connection to a pre-defined host.
Describes UDP Mode, offering faster, more efficient data transfer for unicast or multicast applications.
Covers essential basic settings in the web console, including server name, time zone, local time, and time server configuration.
Details network settings for the NPort IA5150/5250, including IP address, Netmask, Gateway, DNS, and SNMP configurations.
Explains how to configure serial port parameters such as Baud rate, Data bits, Stop bits, Parity, Flow control, FIFO, and Interface type.
Configures operating settings for the NPort IA5150/5250 serial ports, including TCP alive check time, inactivity time, and max connections.
Explains the structure of the Administrator-Configuration window and how to access device configurations.
Illustrates how to access and modify the configuration utility for NPort IA5150/5250 devices.
Provides steps to upgrade the firmware of an NPort IA5150/5250 using the NPort Administrator.
Guides users through setting up NPort IA5150/5250 serial ports as host COM ports using on-line or off-line mapping.
To Next Page
