3
3
Chapter 3 Initial IP Address Configuration
When setting up your NPort IA5150/5250 for the first time, the first thing you should do is
configure the IP address. This chapter introduces the methods that can be used to configure the
device server’s IP address. Select one of the initial IP Address configuration methods to
configure NPort IA5150/5250’s IP Address. For more details about network settings, see the
Network Settings section from Chapter 5, Web Console Configuration.
The following topics are covered in this chapter:
Initializing NPort IA5150/5250’s IP Address
Factory Default IP Address
NPort IA5150/5250 Administration Suite
ARP
Telnet Console
Serial Console (19200, n, 8, 1)
To Next Page
Loading...
Need help?
General
