6
· Aviation-grade Aluminum Alloy
· 200KG Load Cell Sensor
· 15Bit High-precision Angle Sensor
· Adjustable Pedal Feel for All Types of Racing Cars
· Adjustable Spring & Travel
· Support Inverted Installation
1. Attach the Baffle Plate:
Use the 2.5mm hex wrench and screws from the accessory pack to secure the baffle plate to
the base. You can move the baffle plate forward or backward to suit your preference.
2. Mount the Pedal Base:
Method 1 (for installation direct to aluminum profile): Use four M8 screws and a wrench to
secure the base using M8 t-nuts in the aluminum profile slot.
Method 2 (for installation direct to pedal plates) Align the pre-drilled holes and use 4 to 8 M6
screws or mounting hardware supplied with your pedal plate.
Product Introduction
01
Base Plate Installation
02
1
2
To Next Page
Loading...
