Moza Mini MX - Smart Trigger; Firmware Upgrade and Bluetooth Reset

9
Smart Trigger
Click and hold: All Lock Mode
Double click and hold: Sport Gear Mode
One-Click: Face Tracking and lock in the center of the
shot.
Double click: Re-center and exit the current mode
Triple Click: Switch between the rear and front-facing
camera
Note: Mini MX can control the phone's original camera to take pictures,
record/stop. When working with a native camera, some key functions cannot be used. It
is recommended to use it with MOZA Genie App. When the App is connected, the
current mode will be displayed on the App.
Firmware upgrade
Turn off the power of the gimbal first, press and hold the ZOOM-button, and click the
function button at the same time until the indicator light flashes from top to bottom, at
this time the gimbal enters the firmware upgrade mode, then connect to the APP, and
click firmware upgrade.
Bluetooth reset
When you cannot search for Mini MX Bluetooth on your phone, please power on the
gimbal, hold + button, then press the power button at the same time until the power
indicator flashes. Then the Bluetooth reset is successful.