Moza RS V2 - Paddle Mute Pad Installation; Installing Mute Pads; Packing Contents; Included Steering Wheel and Tools

05
Installation of Magnetic Suction Paddle Mute Pad
Place the steering wheel on a flat surface, with the front facing down. Use a hexagonal wrench to remove
the screw on the side of the trigger lever, then use a wrench to lift the latch from theside of the magnetic
paddle (NOTE: you do not need to push it out completely. Just separatethe trigger lever and the latch
would be fine). Apply the first silencer pad on the back of the magnetic hole and the square hole on the
shifter paddle (if it is inconvenient to operate, you can lift the latch completely). Apply the other silencer
pad to the position of the paddle base as shown in the picture. Finally return the latch into place and
tighten the screws.
For more information and tutorial videos, please log in to the official website
(www.mozaracing.com).
06
Packing List
1. RS steering wheel
2. tool kit:
Hexagon screwdriver
8mm aluminum alloy approach block x4
M3x14 screw x8
Mute pad x4
07
Product Spec
Frame material: Brushed aluminum alloy.
Panel material: Forged Carbon Fiber.
Rear shell material: Aluminum alloy.
Paddle material: 3mm thick forged carbon fiber
Size: 13 inches (325mm).
Magnetic paddle: 2.
Double clutch paddles: 2.
Mechanical keyboard texture buttons: 10 (can be
illuminated, 9 colors adjustable)
20 Section knob (can be pressed): 2. Universal
rocker (can be depressed): 2. Highlight led RGB
beads: 10.
LED color: 7-color custom.
Intelligent telemetry: Supported.
Lights setting via Moza Pit House:
Supported.
Steering Wheel Quick Release: MOZA Racing
Quick Release.
Power supply mode: Wireless or Wire.
Signal transmission mode: Wireless or
Wire
Induction mode of magnetic paddle:
Photoelectric.
Magnetic suction paddle mode:
Double Clutch / Single Clutch / Switch.