User’s Manual
08
Mobilepixels.us
Troubleshooting
Problem Troubleshooting advice
Make sure the video cable connecting the monitor and the computer is
properly connected.
Adjust custom R/ G/ B values. Colour in the colour menu of OSD.
Picture is missing
colours
Restore the monitor to factory settings.
Screen image
is too small
Turn off the monitor, disconnect and reconnect the power cord,and turn on
the monitor.
OSD does not
appear on the
screen
Check the signal source. Make sure the computer or phone is not sleep
mode.
Check that the signal cable is properly inserted. Reconnect the signal cable
if necessary.
Restart your computer or phone.
No picture,
indicator light is
red
Since the resolution of the same screen of the mobile phone can be re-sca-
led (aspect ratio), the display can be displayed in full screen.
Computer equipment can be set to 16:9 resolution, the display can be full
screen display
Play a video source with a 16:9 video sources, and the monitor can display full
screen.
The picture does
not fill the entire
screen.
To Next Page
Loading...
Need help?
General
