To Next PageTo Next PageWhy is white smoke coming out of my MPM MFR-06?
White smoke may appear when frying greasy foods in your MPM Fitfryer because a large amount of oil leaks into the pan. This can also happen if the pan has grease residues from previous use. Although the pan may heat up more than usual, this will not affect the appliance or the final result.
What to do if I cannot slide the pan into my MPM MFR-06 properly?
If you're having trouble sliding the pan into your MPM Fitfryer, here are a few things to check: 1. Make sure you haven't filled the basket beyond the MAX level. 2. Ensure the basket is correctly placed in the pan by pushing it down until you hear a click. 3. Confirm that the handle of the baking tray is pushed to a horizontal position so that it doesn't obstruct the pan.
Why are my fried snacks not crispy in MPM Fryer?
If your fried snacks aren't crispy when using the MPM Fitfryer, it might be because you're using snacks intended for a traditional deep fryer. For best results, use oven snacks or lightly brush some oil onto the snacks before frying.
How to fix unevenly fried ingredients in MPM Fitfryer?
For ingredients that lie on top of each other, such as fries, shaking them halfway through the preparation time will help ensure they are fried evenly in the MPM Fitfryer.
How to make fresh fries crispy in MPM Fryer?
To achieve crispy fresh fries in your MPM Fitfryer, ensure you dry the potato sticks thoroughly before adding oil. For a crispier outcome, cut the potato sticks smaller and consider adding slightly more oil.
Why are my fresh fries fried unevenly in MPM Fitfryer?
Unevenly fried fresh fries in the MPM Fitfryer can occur if the potato sticks weren't soaked properly beforehand. Soak them in a bowl for at least 30 minutes, then remove and dry them with kitchen paper. Also, ensure you're using a type of potato that stays firm during frying.
General
