15
EN
BEFORE FIRST USE
1. Remove the vacuum cleaner from the cardboard box. Remove all stickers, shipping locks,
plastic bags, and filling material.
2. Inspect the vacuum cleaner carefully for damage which may have occurred in transport. If
damage is suspected, consult your reseller.
3. Assemble the vacuum cleaner (see Section “ASSEMBLING THE VACUUM CLEANER”).
4. Charge the vacuum cleaner battery (see Section “CHARGING THE BATTERY”).
5. Verify that your power mains match the nameplate ratings of the vacuum cleaner.
DISASSEMBLY OF THE VACUUM CLEANER
1. Press the dust container release button (9)
and remove the dust container from the mo-
tor module (fig.1).
2. Turn the dust container lid (10) slightly and
lift it up. Pay attention to the markings on the
container which indicate the release of the
lock (fig.2).
3. Remove the motor filter (11) and the mesh filter (12) from the dust
container – (fig.3).
Fig. 1
lock
unlock
Fig. 2
Fig. 3
To Next Page
Loading...
