OVERVIEW
3
c a b
1
5
4
2
3
8
7
6
1. Housing
2. Steamer sole
3. Touch control panel
a. Power switch with LED indicator
b. ECO mode switch with LED indica-
tor
c. Steam blast switch with LED indica-
tor
4. Latched steam jet button
5. 250 ml water tank
6. Water tank plug
7. Water tank latches
8. Brush attachment for soft and heavy
textiles
BEFORE FIRST USE
1. Take out the device from the box and remove all protective cardboard elements and foil.
2. Unwind and straighten the cable before use.
NOTICE SMOKE MAY COME OUT OF device DURING FIRST USE. THIS SHALL STOP AFTER SHORT WHILE.
FIRST STEPS
FILLING THE WATER TANK
1. Make sure that the appliance is unplugged from the mains.
2. Hold the housing by the grip with one hand. Pull away the water tank (5)
firmly with the other hand to detach it (Fig. 1).
3. Remove the water tank plug (6) from the fill port.
4. Add fresh water to the maximum level. Check the maximum level in the
water tank by putting the water tank straight up.
CAUTION! straight up. Do not fill beyond the MAX mark. In order to get the best results
from using the clothing steamer and prevent clogging it with scale, always use fresh demineralized or distilled
Fig. 1
12
GB
To Next Page
Loading...
