mPTech Hammer Energy 2 User Manual

© 2020 mPTech. All rights reserved. Hammer Energy 2
11
7. Before the first start
7.1 Mounting the SIM card.
The device is a cellular phone made in Dual SIM technology (2 SIM cards
handling) allowing the use of two mobile networks simultaneously. To insert the
SIM card/s correctly one has to:
• Switch off the phone.
• Open the rubber, water-proof cover (8).
• Use the supplied tool to open (insert the tip energetically into the hole) and
slide out the card tray (8).
• Insert the SIM card/s into the slot in accordance with the picture beneath.
• Gently slide in the card tray and close the moisture-proof cover securely.
7.2 Installation of the memory card
To insert the memory card correctly one has to:
• Switch off the phone.
• Open the rubber water-proof cover (8).
• Use the supplied tool to open (insert the tip energetically into the hole) and
slide out the card tray (8).
• Insert the memory card into the slot as shown in the picture below (instead
of the nanoSIM1 card).
• Gently slide in the card tray and close the moisture-proof cover securely.
Use only memory cards recommended by the manufacturer. Pay attention to
the selection of the proper format - the microSD card, capacity and type/class.

mPTech Hammer Energy 2 Specifications

General

Brand	mPTech
Model	Hammer Energy 2
Category	Cell Phone
Language	English