EasyManua.ls Logo

mPTech myPhone FUN 7 LTE - Buttons

mPTech myPhone FUN 7 LTE
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2019 mPTech. All rights reserved. myPhone FUN 7 LTE
12
When the battery is near a complete discharge, the notification is displayed on
a low battery charge. To continue use of the device charge the battery. If the
battery is completely discharged the device can not be switched on even when
the loading process is ongoing.
Before the device can be turned on again, the battery has to be charged for at
least a few minutes. In case of any problems with the battery or if in need of a
replacement, the device should be delivered to the manufacturer's service
center.
To charge the battery one should:
1. Plug the microUSB plug of the cable from the set into the socket on the
device.
2. Plug the USB plug of the cable from the set into the charger and this plug
into the mains socket. When charging has started, a lightning symbol will
appear in the top right corner of the screen on the battery icon, and when
the device is turned off, an animation showing the battery charge level
should appear.
3. When the charge reaches 100% it means that the battery is fully charged.
Finish the charging.
4. Disconnect the charger from the mains socket and the cables from the
charger and the phone.
8. Buttons
Menu
Pressing it will cause the list of open apps to appear, where you can switch
in-between or turn them off.
A double quick press switches to the previous application.
Home
One quick press takes you to phone desktop.
Pressing and holding activates Google Now.
Back
Pressing <Back> will cause exit from the application/return to the previous
screen.
Blockade on/off button
One quick press locks/unlocks the screen.
Pressing the button for about 2 sec. will cause:
o If the smartphone is off - the device would switch on.
o if your smartphone is on, activates a menu to shut down the device or
reboot the system.
Volume increase and decrease buttons
Pressing during a voice call will cause an increase or decrease of the audio
connection volume.

Table of Contents

Related product manuals