mPTech myPhone Halo C - Charging the Battery; Emergency Language Change; Factory Settings; Troubleshooting

EN © mPTech 2020. All rights reserved. Halo C
17
Charging the battery
Connect the microUSB charger to the charger connector on your
phone, then connect the charger into the power grid. *CAUTION:
Improper connection of the charger can cause serious damage to
the phone. Damages caused by an improper use of the phone are
not covered by the warranty.
During charging, the battery icon in the upper right corner of the
screen should be animated. When charged, the battery icon will
no longer be animated and then disconnect the charger from the
wall outlet. Unplug the cable from the socket on the phone.
Emergency change of language
To restore the factory settings, enter, starting from the phone
Menu: [Menu] > <Up> > <OK> > <3 times - Down> > <OK> > <2
times - Down> > <OK> and then select desired Menu language.
Factory settings
To restore the factory settings, select in the phone Menu:
[Settings] > [Restore Settings]. The code for resetting to factory
settings is: 1122.
Troubleshooting
Komunikat
Possible solution
Insert SIM card
Make sure that the SIM card is installed
correctly.
Input PIN
If the SIM card is secured with the PIN code
you have to enter the PIN when turning the
phone on and press <OK>.
No one can call me
The phone has to be on and within GSM
network reach.