EN © 2020 mPTech. All Rights Reserved. myPhone NOW eSIM
28
8. ESIM function
An internet connection (Wi-Fi or mobile data
transmission) is required to install the eSIM profile
The smartphone should have an eSIM to connect to
the profile. Make sure that it is located in the SIM slot.
(It resembles a standard SIM card).
8.1 Start-up and activation of the eSIM card
Select from the menu list and start eSIM application.
Activation of the card is done by downloading its
profile using a special eSIM code (received from your
network operator)
.
You can scan the eSIM card code
with a QR code scanner or enter it manually by
pressing the icon , at the bottom right of the
application. After scanning or entering the code, the
card profile will download automatically
When the profile is
downloaded, a
window with card
information and a
network coverage
icon in the top
status bar appears.
8.2 Turning off and deleting the profile
The card profile can be disabled by clicking the icon
. Clicking the icon again will turn the profile back
on. When it is turned off, the coverage icon
disappears.
To delete the eSIM card profile completely, select the
bin symbol .
To Next Page
Loading...
