Need help?Do you have a question about the mr. steam MS-150E and is the answer not in the manual?
General| Model | MS-150E |
|---|---|
| Category | Iron |
| kW Rating | 1.5 kW |
| Voltage | 120V |
| Phase | 1-Phase |
| Amperage | 12.5A |
| Power | 1.5kW |
Explains hazard symbols and general safety advice for operating the steam generator.
Provides a method to calculate room volume for choosing the correct generator model based on materials and dimensions.
Important notes, electrical safety warnings, and prerequisites before starting the installation process.
Guidelines for building a suitable and safe steam room enclosure, including materials and design.
Instructions for selecting the optimal location, ensuring proper clearances, and avoiding installation hazards.
An illustrative diagram showing the general setup and component connections for a typical installation.
Specific instructions for installing multiple Super series generators, including interconnecting them.
Comprehensive guide for connecting water inlet, drain, safety valve, and steam outlet.
Instructions for installing the steam line, including insulation and pitch for condensate drainage.
Step-by-step instructions for installing the steam head, including placement and connection details.
Visual representation of the generator with dimensions and connection port details.
Guidelines for qualified electricians regarding voltage, wiring, grounding, and circuit protection.
Wiring schematics for different generator models, illustrating power supply connections.
Detailed diagrams showing the electrical connections for eTempo and eTempo/Plus controls.
Schematics illustrating the wiring for primary and secondary units in Super series configurations.
Instructions for using the optional tandem cable to link multiple generators.
Guidance on initial operation and understanding system status codes.
Detailed steps for installing and verifying the automatic drain system.
Information regarding the optional drain pan and the express steam feature.
Explains the meaning of the indicator lights on the Liquid Level Control Board.
Visual identification of internal components for different generator models.
A comprehensive catalog of part numbers, descriptions, and applicable models.
Details on the control's physical size, included items, and crucial preliminary warnings.
Guidance on selecting the appropriate placement for the eTempo control unit.
Final steps for connecting the control cable and adhering it to the wall for a secure installation.
Instructions for finding the probe's location, drilling, and connecting it to the generator.
Steps for creating a moisture seal and ensuring proper air exposure for the temperature sensor.
Guide for connecting the interface module to the generator and selecting an optimal mounting location.
Instructions on how to pair the remote and interface module, and adjust addresses.
Common problems and solutions for Steam Genie remote control operation.
Advice on how to clean the control panel and steamhead using mild agents.
Essential safety information and routine maintenance recommendations for the steam generator.
Explains how to use the ON/OFF button, PAUSE feature, and the automatic timer.
Guide for setting the desired temperature and switching between Fahrenheit and Celsius units.
Steps for powering up the unit, setting the clock, and basic ON/OFF functionality.
Instructions for programming the steam duration and viewing the current time on the display.
Details on adjusting temperature, using memory functions, and storing preferred settings.
How to activate and operate the AromaSteam and ChromaSteam features for an enhanced experience.
Guidelines for safely applying essential oils to the steamhead.
Step-by-step instructions for replacing the battery in the Steam Genie remote control.
Explains how to control the generator with the Steam Genie and interpret its status lights.
Describes the functions and status lights of the Genie Interface Module.
To Next Page
