Need help?Do you have a question about the mr. steam MS-SUPER 3E and is the answer not in the manual?
Covers child use, burn risks, hyperthermia, and health considerations for steam bath users.
Instructions to prevent overheating, scalding, and slipping hazards during steam bath use.
Important notes and considerations before commencing the steam generator installation.
Requirements and recommendations for building a safe and effective steam room enclosure.
Methodology for calculating adjusted room volume to determine the correct generator size.
Table detailing specifications for various Mr.Steam generator models.
Guidance on selecting an appropriate and safe location for the steam generator unit.
Illustrates a general setup for installing the steam generator and its components.
Guidance on water supply, drain, steam outlet, and safety valve connections.
Recommendations for drain pan use and integrating the AromaSteam system.
Detailed procedure for installing the round and square AromaSteam steamheads.
Illustrates the location of key components on the steam generator unit.
Table showing physical dimensions for MS 90E-400E and MS SUPER 1E-3E models.
Instructions for connecting the main power supply to the steam generator.
Diagrams illustrating field power wiring for MS 90E-400E and MS Super 1E-6E models.
Electrical wiring diagram for single phase installation of MS Super 4E, 5E, 6E.
Steps for initial system startup and checkout procedures.
Reference to installation instructions for optional equipment and accessories.
Explanation of status codes displayed by the control and their probable causes/remedies.
Step-by-step guide for plumbing and connecting the AutoFlush system.
Procedure to verify the correct operation of the AutoFlush system.
Recommendations and installation guidance for the optional drain pan.
Information about the factory-installed Express Steam option.
Explanation of the LED indicators on the Liquid Level Control Board.
Diagram showing components of MS Super Models with cover removed.
Important safety and installation notes before connecting the eTempo control.
Safety warnings regarding routing control wiring with power lines or steam piping.
Key considerations for operating and installing eTempo controls with compatible generators.
Guidance on choosing the optimal location for the eTempo control unit.
Instructions for drilling the hole and routing the control cable to the steam generator.
Procedure for connecting the control and testing its functionality.
Instructions for preparing and applying the adhesive liner for mounting the control.
Guidance on applying silicone sealant for moisture sealing around the control.
Important warnings about using the MSTS probe only with compatible Mr.Steam controls.
Guidance on selecting the optimal location for the remote temperature probe.
Instructions for connecting the remote temperature probe cable to the steam generator.
Procedure for routing the temperature probe cable through the wall into the steam room.
Instructions for applying silicone sealant to create a moisture seal at the cable entry.
Ensuring correct exposure of the temperature bulb for accurate sensing.
Steps for connecting the Genie Interface Module cable to the steam generator.
Guidance on selecting a suitable mounting location for the Genie Interface Module.
Understanding the indicator lights on the Genie Interface Module for status indication.
Instructions for pairing the Steam Genie remote with the Genie Interface Module.
Common issues and solutions for controlling the steam generator with the Steam Genie remote.
Recommendations for cleaning and maintaining the control units and steamheads.
Essential safety advice and operating guidelines for using eTempo controls.
Basic maintenance procedures for Mr.Steam steambath generators.
Details on ON/OFF, PAUSE, Timer, and Memory features of the eTempo control.
Instructions for adjusting temperature and switching between F/C units.
Covers powering up, clock setup, and ON/OFF functionality for eTempo/Plus.
Instructions for setting the steam duration for the eTempo/Plus control.
Instructions for adjusting temperature and changing between F/C units.
How to program and store preferred settings for PROG 1 and PROG 2.
Instructions for activating and using the AromaSteam system with the control.
Instructions for activating and using the ChromaSteam system with the control.
Important warnings and precautions for safe use of essential oils.
Step-by-step guide for replacing the CR2032 battery in the Steam Genie case.
Instructions for turning steam on/off, understanding light indicators and error conditions.
Explanation of the indicator lights on the Genie Interface Module.
Steps for pairing the remote and interface module, and changing addresses.
To Next Page
General