To Next PageTo Next Page
Need help?Do you have a question about the mr. steam MS-400 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Power | 1500W |
| Auto Shut-off | Yes |
| Self-Cleaning | Yes |
| Water Tank Capacity | 300ml |
| Weight | 1.5kg |
Defines essential enclosure specifications for optimal steam bath performance and safety.
Details requirements for pipe connections, water supply, steam outlet, and steam head installation.
Specifies connection type, temperature limits, shut-off valve, strainer, and pressure for water inlet.
Instructions for the steam line piping, material, insulation, and condensate management.
Guidance on steam head placement relative to floor, seating, and orientation for proper steam dispersion.
Requirements for drain valve connection and safety valve installation, including warnings.
Details electrical connection requirements, conductor sizing, grounding, and circuit breaker installation.
Procedure for initial startup, steam generation, and automatic shut-off.
References instruction sheets for optional accessories like SMART/ONE, SMART/PLUS, etc.
Outlines periodic draining procedures and recommendations for hard water areas.
Procedure to check transformer output voltage at the control terminal block.
Procedure to verify control voltage at the control terminal block.
Steps to test water solenoid valve operation and voltage supply.
Procedure to check probe resistance for proper water level sensing.
Tests for contactor operation and voltage at the coil and liquid level control board.
