MrCool DIY E Star Series Troubleshooting Guide

Troubleshooting 24
3. Indoor AC Fan Motor
Power on and set the unit running in fan mode at high fan speed. After running for 15 seconds, measure the voltage of
pin1 and pin2. If the value of the voltage is less than 100V(208~240V power supply) or 50V (115V power supply), the
PCB must has problems and need to be replaced.

MrCool DIY E Star Series Specifications

General

Brand	MrCool
Model	DIY E Star Series
Category	Air Conditioner
Language	English