Need help?Do you have a question about the MrCool DIY-MULTI5-48HP230C and is the answer not in the manual?
General| Brand | MrCool |
|---|---|
| Model | DIY-MULTI5-48HP230C |
| Category | Air Conditioner |
| Cooling Capacity | 48000 BTU |
| Heating Capacity | 48000 BTU |
| SEER Rating | 16 |
| Voltage | 230V |
| Refrigerant | R410A |
| Number of Zones | 5 |
| Phase | 1 |
| Maximum Outdoor Units | 1 |
| Maximum Indoor Units | 5 |
| Operating Temperature (Cooling) | 5°F to 122°F |
| Outdoor Unit Noise Level | 56 dB |
| Type | Multi Zone |
| Warranty | 5 years |
Detailed diagnosis and solutions for various error codes.
Diagnosis and solution for EEPROM parameter errors on indoor/outdoor PCBs.
Diagnosis and solution for indoor/outdoor unit communication errors.
Diagnosis and solution for fan speed and motor related errors.
Diagnosis and solution for errors related to temperature sensors.
Diagnosis and solution for current overload and protection errors.
Diagnosis and solution for IPM and compressor drive errors.
Diagnosis and solution for voltage protection errors.
Diagnosis and solution for communication issues between IPM and main boards.
Diagnosis and solution for PFC module protection faults.
Diagnosis and solution for compressor discharge temperature protection.
Diagnosis and solution for condenser high temperature protection.
Diagnosis and solution for zero crossing detection errors.
Diagnosis and solution for compressor top temperature protection.
Diagnosis and solution for high pressure protection faults.
Diagnosis and solution for low pressure protection faults.
Diagnosis and solution for DC fan motor phase failure.
Diagnosis and solution for compressor phase failure.
To Next Page