Troubleshooting 35
Are the low pressure protector
and main control board wired
Are the low pressure protector
and main control board wired
Measure the resistance of the
protector is normal the value is
Does a problem still exist
Method: Disconnect the plug.
Measure the resistance of the
low pressure protector. If the
protector is normal the value is
o. Does a problem still exist?
Yes
Replace outdoor main board
Replace outdoor main board.. Does a
problem still exist?
No
Is the outdoor ambient
temperature too low?
No
Yes
Is the indoor fan running
Is the indoor fan running
properly in cooling mode?
No
Yes
Yes
Check whether the refrigerant
system is functioning properly
Check whether the refrigerant
system is functioning properly
When the lvel of refrigerant is not
properly after more refrigerant is added
When the level of refrigerant is not
sufficient, does the system function
properly after more refrigerant is added?
Reconnect the low pressure protector and main
Reconnect the low pressure protector and main
eplace low pressure protector
eplace low pressure protector
Open the valve core of the high
Open the valve core of the high
Please refer to the solution of
operating outside of normal
Please refer to the solution of the
“
Fan
Speed is operating outside of normal
range
”
malfunction.