INDOOR UNIT
mrcool.com | Page 12
DO NOT OVERTIGHTEN DRAIN FITTING
TOWARD DRAIN CONNECTION
UNIT MUST BE SLIGHTLY INCLINED
14 CONDENSATE DRAIN TUBING
IMPORTANT
1. When making drain fitting connections to the drain pan, use a thin layer of Teflon paste, silicone, or
Teflon tape and install. Hand-tighten the fittings.
2. When making drain fitting connections to drain pan, do not overtighten. Over tightening fittings can split
pipe connections on the drain pan.
(Continued on next page)
To Next Page
Loading...
