Page 31
mrcool.com
Unit Installation
Electrical Connection
Connecting the Power Cord & Thermostat Wire
Electrical wiring of Single-phase unit: MDUO18024036
1. Remove the big handle/front panel of the outdoor unit and insert one end of the thermostat wire
and the power cord to the terminal board.
2. The power cord should be secured along with the right side plate and fixed to the hook with a wire
clamp so as to avoid contacting the pipeline. The temperature thermostat wire should also be laid
along with the right side plate but away from the power cord.
Unit Installation
Electrical wiring of Single-phase unit: MDUO18048060
Page 31
mrcool.com
To Next Page
Loading...
