Need help?Do you have a question about the MREL MicroTrap and is the answer not in the manual?
General| Brand | MREL |
|---|---|
| Model | MicroTrap |
| Category | Measuring Instruments |
| Language | English |
Lists all hardware components provided with the MicroTrap™™ VOD/Data Recorder system.
Provides instructions for installing the DAS™™ Data Acquisition Suite software.
Explains the meaning of various settings for VOD measurements, like Trigger Level and Recording Rate.
Provides a general overview of the MicroTrap™™ VOD/Data Recorder and its capabilities.
Outlines critical safety precautions for operating the MicroTrap™™ in explosive environments.
Details the main applications of the MicroTrap™™ VOD/Data Recorder for VOD testing.
Describes additional applications when the MicroTrap™™ has the Scope Upgrade installed.
Lists the MicroTrap™™ VOD/Data Recorder, Carrying Case, Battery Charger, USB Cable, and BNC Adapters.
Details the internal rechargeable battery, its specifications, and charging information.
Explains the procedure to check the power status of the MicroTrap™™ VOD/Data Recorder.
Provides step-by-step instructions for recharging the MicroTrap™™ VOD/Data Recorder's battery.
Explains how to operate the device using external power sources like AC mains or a 12 VDC battery.
Offers guidance on proper procedures for storing the MicroTrap™™ for extended periods.
Introduces the different types of VOD resistance probes available for the MicroTrap™™.
Lists detailed technical specifications for the MicroTrap™™ VOD/Data Recorder.
Provides safety guidelines for choosing a suitable site for explosive testing.
Explains the resistance wire technique used for measuring VOD with the MicroTrap™™.
Details the procedure for using ProbeRods to test explosive samples.
Outlines the process for using ProbeCable to test explosives in blastholes.
Advises on protecting ProbeCable and coaxial cables from damage during operations.
Guides the user through the setup procedure for conducting VOD measurements.
Explains the meaning of "Out of Range" lights and troubleshooting steps.
Details how to use external triggers for recording VOD data.
Provides extra details regarding memory capacity and triggering mechanisms.
Introduces the capability of recording DC voltage signals from various gauges.
Explains the procedure for connecting external gauges to the device.
Provides advice on protecting signal cables from damage during testing.
Guides the user through the setup for recording voltage signals from gauges.
Explains how to use external triggers for recording voltage signals.
Provides further details on the memory allocation and recording time calculations.
Details the procedure for downloading recorded data from the device to a computer.
Refers to the manual for selecting data files for analysis using the software.
Provides contact information for MREL Group of Companies Limited for support.
To Next Page
