T: +1-613-545-0466 www.mrel.com contact@mrel.com
11
LED Display:
The LED screen is a two-digit display designed to report the status of the internal battery, the total number of tests programmed by the
DAS™ Data Acquisition Suite , and the number of tests remaining to be filled. The LED screen also displays special characters when
advanced operations are being performed.
Battery Level:
The BATTERY STATUS button is pressed to display the battery level on the LED screen. The MicroTrap™ VOD/Data Recorders battery level
is displayed in integers from 0 to 10. Full battery is displayed as 10. A battery level of 8 would represent 80% charge remaining.
ON/OFF Switch
STATUS Indictator
MICROTRAP USB COM
TOTAL TESTS Button
NEXT TEST Button
REMAINING TESTS Button
STOP Button
OUT OF RANGE Lights
TRIG EXT/INT Switch
START Button and Indictator
BATTERY STATUS Button
LED Screen
To Next Page
Loading...
