MRP IC702 - Setting the Ice Cube Size; Ice Full, Fill Water, and Malfunction Indicators

SETTING THE ICE CUBE SIZE
Use the SELECT button to set the ice cube size. There are 3 different settings of ice
cubes to choose from.
S=Small (this will take approximately 9 minutes)
M=Medium (this will take approximately 11 minutes)
L=Large (this will take approximately 13 minutes)
The default ice cube size is Medium.
After the button has been pressed the snow flake image will keep flashing to
indicate that the machine has begun the preparation of the ice cubes in the selected size.
-Within 15 minutes, the appliance is at the correct temperature and the first ice cubes are
ready. As long as the appliance is switched on, it will continue to produce 9 ice cubes
every 9-13 minutes (depending on the size)
- Look through the transparent window (1) to check whether the ice-cube is running
smoothly.
During the initial startup, IC702/703 Ice Maker will initially produce two sets of ice. Once it
reaches the ideal temperature, it will then produce full size ice cubes.
ICE FULL/FILL WATER/MALFUNCTION
If the ice cube bucket is completely full with ice cubes the icon display will appear
and emit a short beeping sound.
Take the ice cube bucket out of the appliance, store the ice cubes in a cool place and put
the bucket back into the appliance. The ice cubes makers can be switched on again
straight away to prepare a new batch of ice cubes.
-In the absence of water, the icon display will start flashing and emit a short beeping
sound. Fill the reservoir with water and press the button to continue the process.
-If the ice cubes are left in the appliance they will gradually melt, the melted water will
collect in the water reservoir and then the ice cubes maker will start to produce a new
batch of ice cubes. The machine can be stopped at any time by pushing the button .
When the ice cube maker is not being used for an extended period of time, empty the
water out of the reservoir and unplug the appliance from the electric wall socket.
-If there is a malfunction happens, the appliance will emit a short beeping sound and icon
display flashes.