Why is my MRP IC702 not making ice or not performing well?
Why is my MRP Ice Maker not making ice or not performing well? Possible causes include blocked heat output, high water temperature, high ambient temperature, or refrigerant leakage. To resolve this, clean the dust from the air inlet and outlet, use room temperature water, and move the ice maker to a cooler location. If the refrigerating system is damaged, professional maintenance is required.
What to do if the ADD WATER icon flashes on my MRP IC702 Ice Maker?
What to do if the ADD WATER icon flashes on my MRP Ice Maker? This indicates an absence of water. Refill the ice maker with drinkable water and press the button to clear the alert. If the issue persists, the water supply system or components may be damaged, requiring professional maintenance.
Why does the ICE FULL icon light up on my MRP IC702?
Why does the ICE FULL icon light up on my MRP Ice Maker? This can occur if the ice bucket is full or due to low-temperature protection (ambient temperature is below 5°C). The ice maker should automatically recover once you remove ice cubes. If it's due to low temperature, move the ice maker to a warmer place where the ambient temperature is above 5°C.
What does it mean when the malfunction icon flashes on my MRP Ice Maker?
What does it mean when the malfunction icon flashes on my MRP Ice Maker? This usually means that the ice-making box is in an incorrect position. Check for any foreign objects stuck in the ice-making box. If there are no obstructions, internal components may be damaged, requiring professional maintenance.
Explains how to select ice cube size (Small, Medium, Large) and the time taken for each.
Details indicators and actions for full ice bucket, low water level, and system malfunctions.
Details how to set the device time and schedule ice making start/stop times.
First stage of self-cleaning using a 1:1 water and vinegar mixture.
Second stage using fresh water, followed by draining and air drying.
To Next Page
General