Need help?Do you have a question about the MRV Communications LX-4000 Series and is the answer not in the manual?
Contact information for technical assistance and troubleshooting the MRV LX-4000 Series equipment.
Lists other manuals available in the LX documentation set for further reference.
Explains document conventions and details key technical specifications of the LX-4000 Series.
Covers physical installation, unpacking, inspection, and the contents of the package.
Describes front and rear panel LEDs, port status indicators, and unit interfaces.
Details environmental requirements, rack mounting, and all necessary cable connections.
Guides through powering on the unit, understanding POST, system login, passwords, and basic setup.
Outlines options for initial unit configuration, including quick setup and IP address assignment.
Details accessing and using the Graphical User Interface (GUI) and EZConfig tool for setup.
Explains remote connection methods via Telnet/SSH and direct serial port access.
Covers the CLI command structure and considerations for internet connectivity.
Describes connecting sensors and managing power devices like 5250, 5150, and 4800 series.
Explains using LX ports for monitoring alarms and controlling external equipment.
Lists the default settings for the ppciboot configuration, including network and boot options.
Provides definitions and an example for interpreting POST test error codes.
Covers general cabling advice, serial device connectors, diagnostic port, and 10/100 connectors.
Details modular adapters, pin assignments, ordering cables, and connector lock installation.
Discusses RJ-45 wiring, modem control, hardware flow control, and different cable types.
General| Brand | MRV Communications |
|---|---|
| Model | LX-4000 Series |
| Category | Server |
| Language | English |
To Next Page
