MRV Communications LX-4048

Need help?

Do you have a question about the MRV Communications LX-4048 and is the answer not in the manual?

Summary

Chapter 1 - Overview of the LX Series

System Specifications

Details the technical specifications of the LX Series hardware and software.

Chapter 2 - Installing the LX Series

Hardware Installation

Guides through the physical installation process of the LX Series unit.

Cable Connections

Explains the various cable connections required for the LX unit.

Connecting DC Power

Describes the procedure for connecting DC power to compatible LX Series models.

System Login and Passwords

Details the default username, password, and superuser access for the LX Series.

Resetting the Unit

Instructions on how to reset the LX Series unit to its factory default settings.

Configuring the LX Unit for the First Time

Options for initial configuration of the LX unit upon first boot.

First Time Quick Configuration

Step-by-step guide for performing the initial connectivity setup of the LX unit.

Accessing and Configuring the Graphical User Interface (GUI)

Instructions for accessing and using the LX Series web-based graphical user interface.

Software Upgrades

Procedures for upgrading the LX Series unit's software using different methods.

Accessing and Configuring Additional Features

Connecting to the LX Series via Telnet or SSH

Guide for establishing remote console access using Telnet or SSH protocols.

Appendix A - Technical Specifications

Table 1 - LX Series Specifications

A table detailing the technical specifications of the LX Series units.

Appendix B - POST Test Error Codes

Error Code Definitions

Provides definitions for the LX Series Power On Self Test (POST) error codes.

Appendix C - Cabling the LX Series

Cabling Considerations