To Next PageTo Next PageWhy is my MS ENERGY URBAN 500's speed not changing or the maximum speed is too low?
The scooter's speed might not be changing, or the maximum speed could be too low due to low battery voltage, a faulty governor handle, or a bad controller. To resolve this, fully charge the battery and replace the governor controller handle.
What to do if MS ENERGY Scooter power supply is on but the motor doesn't work?
If the power supply is on but the motor isn't working, it could be due to a faulty throttle handle, a bad electric door lock and contact point, or a bad controller. Try replacing the throttle handle and reattaching the contact signal part.
Key safety advice for operating and storing the electric scooter.
Warning about electrical hazards and restrictions on opening the product.
Connecting and securing the handlebar to the front stem.
Instructions for charging the electric scooter's battery.
Steps to download and connect the MS Energy Urban app.
Important notes regarding app functionality and model variations.
Preparation steps before operating the electric scooter.
Instructions for operating the electric scooter safely.
How to use and adjust the front and rear brakes.
Instructions for maintaining tires and other scooter components.
Guidance on lubricating the scooter's suspension system.
Information and instructions for the scooter's charger.
Troubleshooting and fixing handlebar looseness.
Diagnosing issues using fault codes and their solutions.
Details about the scooter's adapter and power consumption.
Guidelines for the proper disposal of used batteries.
Statement of compliance with EU directives.
General
