4
.1 Half mask
Cleaning and Care: Clean and disinfect halfmask after every use. To
clean the half mask remove the filters (cleaning the
filters is not possible). Use a mild detergent in
lukewarm water and rinse with clear water and dry
a
ir (max. 50°C).
Spare parts: Spare parts are not provided.
Storage: Only undamaged half mask must be stored for fur-
ther use. When not in use, store respiratory pro-
t
ective device in cool, dry and clean ambient air.
Shelf life: The manufacturing date of the half mask is marked
i
nside. Example (see Fig. 7): Manufacturing date
April 2006
4.2 Filter
Filter Proper Storage
• -5 to 50°C, max. 90 % relative humidity for
long-term storage
• Storage life: See information on the filters (pic-
togram "Hourglass")
• In a closed plastic bag
• 5 to 35°C, max. 60 % relative humidity
• Storage life: replace 6 months after first use at
the latest!
• -5 to +50 °C, max. 90 % relative air humidity
(see pictograms)
• Storage life: See information on the filters (pic-
togram "Hourglass")
• Single use only, do not reuse!
No further storage.
Factory sealed and properly stored MSA respiratory filters are
maintenance free.
5 Ordering Information
5.1 Half Mask
Description Part No.
Advantage 200 S (small) 430357
Advantage 200 M (medium) 430356
Advantage 200 L (large) 430358
5.2 Full Face Mask
Description Part No.
Advantage 3211 S (small, textile neck strap) 10027727
Advantage 3221 M (medium, textile neck strap) 10027726
Advantage 3231 L (large, textile neck strap) 10027728
Advantage 3212 S (small, silicone neck strap) 10042732
Advantage 3222 M (medium, silicone neck strap) 10042733
A
dvantage 3232 L (large, silicone neck strap) 10042734
5.3 Respiratory protective filters
Attention!
Only use undamaged filters of the same type and class.
Always replace both filters at a time.
Filter Description Filter type Part No.
2
0 P2 particle [pre-]filter EN 143:2000 P2 R 10011347
GOST R 12.4.194-99 P2R
DSTU EN 143:2002 P2
2
00 P3 particle filter EN 143:2000 P3 R 430375
GOST R 12.4.194-99 P3R
DSTU EN 143:2002 P3
201 A gas filters EN 14387 A2 430371
GOST 12.4.235-2012 A2
DSTU EN 14387:2006 A2
201 K gas filters EN 14387:2004 K2 10107163
GOST 12.4.235-2012 K2
DSTU EN 14387:2006 K2
201 ABE gas filters EN 14387:2004 A1, B1, E1 10144827
GOST 12.4.235-2012 A1 B1 E1
DSTU EN 14387:2006 A1 B1 E1
201 ABEK gas filters EN 14387:2004 A2, B2, E1, K1 430373
GOST 12.4.235-2012 A2 B2 E1 K1
DSTU EN 14387:2006 A2 B2 E1 K1
202 A-P3 combination filters EN 14387:2004 A2 P3 R 430372
GOST 12.4.235-2012 A2-P3 R
DSTU EN 14387:2006 P3
202 K-P3 combination filters EN 14387:2004 K2 P3 R 10107165
GOST 12.4.235-2012 A1 B1 E1 P3 R
DSTU EN 14387:2006 K2 P3
202 ABE-P3 combination filters EN 14387:2004 A1, B1, E1 P3 R 10144828
GOST 12.4.235-2012 A1 B1 E1 P3 R
DSTU EN 14387:2006 A1 B1 E1 P3
202 ABEK-P3 combination filters
EN 14387:2004 A2, B2, E1, K1 P3 R
430374
GOST 12.4.235-2012 A2 B2 E1 K1 P3 R
DSTU EN 14387:2006 A2 B2 E1 K1 P3
Tabtec A1 gas filters EN 14387 A1 10030510
Tabtec A2 gas filters EN 14387 A2 10030511
Tabtec A2B2E1K1
gas filters EN 14387 A2, B2, E1, K1 10038476
Flexifilter P2 particle filter EN 143:2000 P2 R 10027699
Flexifilter P3 particle filter EN 143:2000 P3 R 10027639
Flexifilter P3-OR
particle filter EN 143:2000 P3 R 10027697
Adapter for 10030514
TabTec/
FLEXIfilter [pair]
* - national types are identical to European Standard, except of marking with R/NR
5.4 Accessories
Description Part No.
Advantage+Comfo half masks belt pouch 10016038
Covers, R95, ADV. 200,2/PKG 815401
To Next Page
Loading...
