Need help?Do you have a question about the MSA Ultra Elite Responder and is the answer not in the manual?
General| NIOSH Approval | Yes |
|---|---|
| Type | SCBA |
| Cylinder Material | Composite |
| Cylinder Capacity | 30 minutes to 60 minutes (depending on cylinder) |
| HUD (Heads-Up Display) | Optional |
Procedure to remove the SpeeD-ON head harness assembly from the facepiece, including strap and buckle detachment.
Detailed steps for removing the main component housing from the facepiece.
Instructions to disconnect and remove the complete pneumatic assembly.
Steps for putting together the component housing with its various parts.
Procedure for installing the complete pneumatic assembly into the housing.
Procedure for correctly installing the pneumatic piston with lubrication.
Steps for correctly fitting the main component housing onto the facepiece.
Detailed instructions for installing the lens assembly and its retaining ring.
Instructions for installing the SpeeD-ON head harness assembly.
Steps for threading the cable and installing the ClearCommand microphone.
Guidelines for cleaning and disinfecting the facepiece and components using approved solutions.
To Next Page
